R&S SMW-K44, User Manual

Page: 372 / 455

Remote-Control Commands Satellite Navigation
372 User Manual 1178.6379.02 ─ 01
[:SOURce<hw>]:BB:GNSS:ADGeneration:NAVigation:CREate <Filename>
Stores the current assistance data settings into the selected navigation file. Assistance
data settings are stored as navigation file with the specific file extensions
*.rs_nav
or
into RINEX files with extension
.10n
.
Parameters:
<Filename> string
Filename or complete file path
Example: See Example "Generating of GPS assistance data"
on page 360.
Manual operation: See "Navigation" on page 185
[:SOURce<hw>]:BB:GNSS:ADGeneration:IONospheric:CREate <Filename>
Stores the current assistance data settings into the selected acquisition file. The file
extension (
*.rs_ion
) is assigned automatically.
Parameters:
<Filename> string
Filename or complete file path
Example: See Example "Generating of GPS assistance data"
on page 360.
Manual operation: See "Ionospheric" on page 186
19.15 Data Logging
Example: Enabling data logging
The following is a simple example on how to use the settings.
SOURce1:BB:GNSS:TMODe NAV
SOURce1:BB:GNSS:SYSTem:GALileo:STATe 1
SOURce1:BB:GNSS:TIME:STARt:TBASis GPS
SOURce1:BB:GNSS:NAVigation:SIMulation:WNUMber?
// 1780
SOURce1:BB:GNSS:NAVigation:SIMulation:TOWeek?
// 280816
SOURce1:BB:GNSS:RECeiver:V1:POSition MOV
SOURce1:BB:GNSS:RECeiver:V1:LOCation:WAYPoints:FILE "Melbourne_Car_Motion.xtd"
SOURce1:BB:GNSS:SV:SELection:GPS:MAX 4
SOURce1:BB:GNSS:SV:SELection:GALileo:MAX 4
SOURce1:BB:GNSS:LOGGing:MODE OFFL
SOURce1:BB:GNSS:LOGGing:OFFLine:TOFFset 0
Data Logging