Remote-Control Commands
Satellite Navigation
280
User Manual 1178.6379.02 ─ 01
[:SOURce<hw>]:BB:GNSS:SYSTem:SBAS:WAAS:NMESsage:NAV:PRNMask:
PERiod
<Interval>
[:SOURce<hw>]:BB:GNSS:SYSTem:SBAS:WAAS:NMESsage:NAV:RINex:PERiod
<Interval>
[:SOURce<hw>]:BB:GNSS:SYSTem:SBAS:WAAS:NMESsage:NAV:SERVice:
PERiod
<Interval>
[:SOURce<hw>]:BB:GNSS:SYSTem:SBAS:WAAS:NMESsage:NAV:UTCoffset:
PERiod
<UtcOffsetPeriod>
[:SOURce<hw>]:BB:GNSS:SYSTem:SBAS:EGNOS:NMESsage:NAV:
CECovariance:PERiod
<Interval>
[:SOURce<hw>]:BB:GNSS:SYSTem:SBAS:EGNOS:NMESsage:NAV:DFACtor:
PERiod
<Interval>
[:SOURce<hw>]:BB:GNSS:SYSTem:SBAS:EGNOS:NMESsage:NAV:
FCDegradation:PERiod
<Interval>
[:SOURce<hw>]:BB:GNSS:SYSTem:SBAS:EGNOS:NMESsage:NAV:
FCORrection:PERiod
<Interval>
[:SOURce<hw>]:BB:GNSS:SYSTem:SBAS:EGNOS:NMESsage:NAV:IGRid:
PERiod
<Interval>
[:SOURce<hw>]:BB:GNSS:SYSTem:SBAS:EGNOS:NMESsage:NAV:
LTCorrection:PERiod
<Interval>
[:SOURce<hw>]:BB:GNSS:SYSTem:SBAS:EGNOS:NMESsage:NAV:PRNMask:
PERiod
<Interval>
[:SOURce<hw>]:BB:GNSS:SYSTem:SBAS:EGNOS:NMESsage:NAV:RINex:
PERiod
<Interval>
[:SOURce<hw>]:BB:GNSS:SYSTem:SBAS:EGNOS:NMESsage:NAV:SERVice:
PERiod
<Interval>
[:SOURce<hw>]:BB:GNSS:SYSTem:SBAS:EGNOS:NMESsage:NAV:UTCoffset:
PERiod
<UtcOffsetPeriod>
[:SOURce<hw>]:BB:GNSS:SYSTem:SBAS:EGNOS:NMESsage:NAV:ALManac:
PERiod
<Interval>
Sets the periodicity of the SBAS message.
Parameters:
<Interval>
integer
Range:
0 to 999
*RST:
200
Example:
See
Example "Enabling SBAS and applying automatic SBAS
Manual operation:
See
SBAS Corrections