Remote-Control Commands
Satellite Navigation
264
User Manual 1178.6379.02 ─ 01
[:SOURce<hw>]:BB:GNSS:POWer:REFerence
<ReferencePower>
Sets the power level that is used as a reference for the calculation of the power level of
the satellites.
Parameters:
<ReferencePower>
float
Range:
-145 to 20
Increment: 0.01
*RST:
-30
Example:
See
Example "Configuring the SV power and modulation control
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:POWer:PLOSs
<PathLossState>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:POWer:PLOSs
<PathLossState>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GALileo:POWer:PLOSs
<PathLossState>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:POWer:PLOSs
<PathLossState>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:BEIDou:POWer:PLOSs
<PathLossState>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:POWer:PLOSs
<PathLossState>
If enabled, the power of the SV ID signals is reduced to account for the free space
attenuation.
Parameters:
<PathLossState>
0 | 1 | OFF | ON
*RST:
0
Example:
See
Example "Configuring the SV power and modulation control
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:POWer:OFFSet
<PowerOffset>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:POWer:OFFSet
<PowerOffset>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GALileo:POWer:OFFSet
<PowerOffset>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:POWer:OFFSet
<PowerOffset>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:BEIDou:POWer:OFFSet
<PowerOffset>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:POWer:OFFSet
<PowerOffset>
Reduces the signal of the selected SV ID by the defined value.
Parameters:
<PowerOffset>
float
Range:
-21 to 0
Increment: 0.01
*RST:
0
Example:
See
Example "Configuring the SV power and modulation control
Signals and Power Configuration per Satellite