R&S SMJ100A, Operating Manual

Page: 663 / 874

Remote Control Commands
R&S
®
SMJ100A
647 Operating Manual 1403.7458.32 ─ 14
[:SOURce<hw>]:BB:DM:FILTer:TYPE <Type>
The command selects the filter type.
When a standard is selected (
:BB:DM:STAN
), the filter type and filter parameter are
set to the default value.
Parameters:
<Type> RCOSine | COSine | GAUSs | LGAuss | CONE | COF705 |
COEQualizer | COFequalizer | C2K3x | APCO25 | SPHase |
RECTangle | USER | PGAuss | LPASs | DIRac | ENPShape |
EWPShape | LTEFilter | LPASSEVM | APCO25Hcpm |
APCO25Lsm
*RST:
GAUSs
Example: BB:DM:FILT:TYPE COS
selects the Cosine filter type.
Manual operation: See "Filter" on page 349
[:SOURce<hw>]:DM:FILTer:PARameter <Parameter>
Sets the filter parameter of the currently selected filter type.
To set the filter type, use command
[:SOURce<hw>]:BB:DM:FILTer:TYPE
on page 647.
Parameters:
<Parameter> float
Range:
0.05 to 2.5
Increment: 0.01
*RST:
0.35
Example: BB:DM:FILT:TYPE COS
DM:FILT:PAR 0.5
sets 0.5 roll-off factor for the cosine filter.
Modulation Settings
[:SOURce<hw>]:BB:DM:AQPSk:ANGLe
...........................................................................647
[:SOURce<hw>]:BB:DM:ASK:DEPTh
............................................................................... 648
[:SOURce<hw>]:BB:DM:CODing
..................................................................................... 648
[:SOURce<hw>]:BB:DM:FORMat
.....................................................................................649
[:SOURce<hw>]:BB:DM:FSK:DEViation
........................................................................... 649
[:SOURce<hw>]:BB:DM:FSK:VARiable:SYMBol<ch0>:DEViation
....................................... 650
[:SOURce<hw>]:BB:DM:FSK:VARiable:TYPE
...................................................................650
[:SOURce<hw>]:BB:DM:MDELay?
...................................................................................650
[:SOURce<hw>]:BB:DM:AQPSk:ANGLe <Angle>
For AQPSK modulation, sets the angle alpha between the point (0,0) and the I axis.
SOURce Subsystem