R&S SMJ100A, Operating Manual

Page: 610 / 874

Remote Control Commands
R&S
®
SMJ100A
594 Operating Manual 1403.7458.32 ─ 14
Manual operation: See "Generate Signal RAM (Sine Test Signal)" on page 392
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:CREate:NAMed <Filename>
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:CREate:NAMed <Filename>
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:SINE:CREate:NAMed <Filename>
Generates a signal and saves it to a waveform file.
Setting parameters:
<Filename> string
Example: BB:ARB:TSIG:SINE:CRE:NAM 'sine_test'
generates a test sine signal and saves it into the wavefile
sine_test
.
Usage: Setting only
Manual operation: See "Generate Signal HD (Sine Test Signal)" on page 392
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:I <I>
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:Q <TSig>
Sets the value for the Q component of the test signal
Parameters:
<TSig> float
Range:
-1 to 1
Increment: 0.001
*RST:
0
Default unit: FS
Example: BB:ARB:TSIG:CIQ:Q 0.5
sets the value for the Q component of the test signal.
Manual operation: See "Q Value (Const IQ Test Signal)" on page 393
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:AMPLitude <Amplitude>
Sets the digital amplitude of the rectangular wave.
Parameters:
<Amplitude> float
Range:
0 to 1
Increment: 0.001
*RST:
0.800
Default unit: FS
Example: BB:ARB:TSIG:RECT:AMPL 0.5
sets the amplitude of the test signal
Manual operation: See "Amplitude (Rect Test Signal)" on page 392
SOURce Subsystem