R&S SMJ100A, Operating Manual

Page: 435 / 874

Instrument Function
R&S
®
SMJ100A
419 Operating Manual 1403.7458.32 ─ 14
Create
Creates a new multi carrier waveform defined by the multi carrier table and General
Setting entries.
This multi carrier waveform is saved with the file name specified in "Output File". If no
file name is specified, the File Manager opens so that the file name can be entered. As
with normal waveforms, the file extension is
*.wv
.
Depending on the configuration of the multi carrier waveform, calculation may take
some time. A panel with a progress bar and an "Abort" button appears during the cal-
culation process.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CREate
on page 604
Create and Load
Creates a new multi carrier waveform defined by the multi carrier table and General
Setting entries and loads it subsequently in the "ARB" main menu.
This multi carrier waveform is saved with the file name specified in "Output File". If no
file name is specified, the File Manager opens so that the file name can be entered. As
with normal waveforms, the file extension is
*.wv
.
Depending on the configuration of the multi carrier waveform, calculation may take
some time. A panel with a progress bar and an "Abort" button appears during the cal-
culation process.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CLOad
on page 603
Muti Carrier Table
The "Multi Carrier Table" manu is oped by means of the "Carrier Table" button in the
middle part of the Multi Carrier Waveforms menu. The carrier settings can be checked
in the graphical "Carrier Graph" submenu.
The "Carrier Table Assistant" section can be used to set a selectable carrier range.
This section serves as a optional mean to quickly set up a multi carrier scenario within
a specified carrier range.
Baseband Signal - Baseband Block