R&S SMJ100A, Operating Manual, Page: 240 / 874

Instrument Function
R&S
®
SMJ100A
224 Operating Manual 1403.7458.32 ─ 14
State - User Correction
Activates/deactivates user correction.
The "UCOR" status message appears in the frequency and level display.
Remote command:
[:SOURce<hw>]:CORRection[:STATe]
on page 708
Use Multi Level Correction - User Correction
Activates the use of the multi level correction data (see Chapter 5.5.8.3, "Filling the
Correction List with Power Sensor Measurement Data" , on page 229) if checked. Oth-
erwise the Single Level Correction measurement data is used.
Remote command:
[:SOURce<hw>]:CORRection:MLEVel:STATe
on page 708
User Correction Value - User Correction
Indicates the current value for level correction.
Remote command:
[:SOURce<hw>]:CORRection:VALue?
on page 708
User Cor. Data - User Correction
Calls the "File Select" menu for selecting and creating a list or the "File Manager".
Remote command:
[:SOURce]:CORRection:CSET:CATalog?
on page 699
[:SOURce<hw>]:CORRection:CSET[:SELect]
on page 707
[:SOURce]:CORRection:CSET:DELete
on page 703
Edit User Cor. Data - User Correction
Calls the editor for editing the selected user correction list.
A list consists of any number of frequency/level value pairs. The currently selected list
is displayed.
Each list is saved as a separate file with extension
*.uco
. The file name and the direc-
tory to which the file is saved are user-selectable.
RF Signal and Analog Modulations - RF Block