R&S SMJ100A, Operating Manual

Page: 724 / 874

Remote Control Commands
R&S
®
SMJ100A
708 Operating Manual 1403.7458.32 ─ 14
Parameters:
<Filename> <table name>
Example: CORR:CSET 'D:\user\ucor1'
selects the table
ucor1
.
CORR ON
activates level correction. Correction is performed using the
table
ucor1
.
Manual operation: See "User Cor. Data - User Correction" on page 224
[:SOURce<hw>]:CORRection:MLEVel:STATe <State>
The command activates the use of multi level data for user correction. The setting is
only available for user correction list with multi level correction data (see command
SOUR:CORR:CSET:DATA:POW:MLEV:STAT ON
).
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
0
Example: SOUR:CORR:MLEV:STAT ON
activates the use of multi level correction data for user correc-
tion.
Manual operation: See "Use Multi Level Correction - User Correction" on page 224
[:SOURce<hw>]:CORRection[:STATe] <State>
Activates/deactivates level correction. Level correction is performed using the table
which has been selected with the command
[:SOURce<hw>]:CORRection:CSET[:
SELect]
.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
0
Example: SOUR:CORR:CSET 'D:\user\ucor1'
selects the table
ucor1
.
SOUR:CORR ON
activates user correction.
Manual operation: See "State - User Correction" on page 224
[:SOURce<hw>]:CORRection:VALue?
Queries the current value for user correction.
SOURce Subsystem