Remote-Control Commands
R&S
®
SMCVB-K161
54
User Manual 1179.1035.02 ─ 02
6.3.3
Test Signal Commands
Example: Configure test signal properties
SOURce1:BB:ATSM:SOURce TEST
SOURce1:BB:ATSM:TESTsignal TTSP
// Sets a test TS packet as test signal.
********************************************************************************
// Alternatively, set more specific test signals with PRBS parts within
// the test packet.
********************************************************************************
SOURce1:BB:ATSM:TESTsignal PBIN
// Sets the PRBS before the interleaver bits.
SOURce1:BB:ATSM:TESTsignal PBET
// Sets the PRBS before the trellis coder bits.
SOURce1:BB:ATSM:TESTsignal PBEM
// Sets the PRBS before the mapper bits.
********************************************************************************
// Configure test signal properties.
********************************************************************************
SOURce1:BB:ATSM:TSPacket H184
SOURce1:BB:ATSM:PIDTestpack NULL
SOURce1:BB:ATSM:PID?
// "8191" in decimal representation
// "1FFF" in hexadecimal representation
SOURce1:BB:ATSM:PIDTestpack VAR
SOURce1:BB:ATSM:PID 4607
// corresponds to "11FF" in hexadecimal representation
SOURce1:BB:ATSM:PAYLoad PRBS
SOURce1:BB:ATSM:PRBS P23_1
Commands
[:SOURce<hw>]:BB:ATSM:TESTsignal
...............................................................................54
[:SOURce<hw>]:BB:ATSM:TSPacket
................................................................................. 55
[:SOURce<hw>]:BB:ATSM:PIDTestpack
.............................................................................55
..........................................................................................55
..................................................................................56
...................................................................................... 56
[:SOURce<hw>]:BB:ATSM:TESTsignal
<TestSignal>
Defines the test signal data.
Parameters:
<TestSignal>
TTSP | PBIN | PBET | PBEM
TTSP
Test TS packet with standardized packet data used as modula-
tion data in the transport stream.
Input Signal Commands
