![background image](http://html2.mh-extra.com/html/rands/sma100b/sma100b_getting-started_3078688029.webp)
Instrument Tour
R&S
®
SMA100B
31
Getting Started 1419.8620.02 ─ 07
Required option
Connector type
RF: R&S
SMAB-B120
Test port adapter, PC 3.5 mm female
RF: R&S
SMAB-B131
Test port adapter, PC 3.5 mm female
RF: R&S
SMAB-B140(N)
Test port adapter, PC 3.5 mm female
RF: R&S
SMAB-B150(N)
PC 1.85 mm female
RF: R&S
SMAB-B167(N)
PC 1.85 mm female
Risk of RF connector and cable damage
If you tighten the connectors too strongly, you can damage the cables and
connectors. If you do not tighten the connectors enough, the measurement
results can be inaccurate.
Always use an appropriate torque wrench suitable for this type of connector
and apply the torque specified in the application note
.
The application notes are available on the Internet and provide additional
information on care and handling of RF connectors.
Rohde
&
Schwarz offers appropriate torque wrenches for various connec-
tors. For ordering information, see the R&S
SMA100B data sheet or product
brochure.
5.1.12
Pulse Signal Connectors
Pulse Sync
Output signal for synchronizing the pulse generator signal. The synchronization
signal is generated at the beginning of each pulse. For double-pulse generation,
the synchronization signal is generated at the beginning of the first pulse.
Pulse Video
Output of the internal pulse generator signal or the looped through pulse signal
from Pulse Ext connector (video signal).
Pulse Ext
Input for an external pulse modulation signal or an external trigger/gate signal for
the pulse generator.
Front Panel Tour