R&S NRP2, User Manual

Page: 341 / 437

Remote Control - Commands
R&S
®
NRP2
323 User Manual 1173.9157.02 ─ 03
Parameters:
<state> NORMal | FAST
*RST:
NORMal
SYSTem:STANdard:CATalog?
Returns a list of stored standards containing a series of strings separated by commas.
The strings can be used as parameters for the
SYSTem:STANdard:PRESet
<string>
command.
Usage: Query only
SYSTem:STANdard:PRESet <string>
The R&S NRP2 can be easily configured for measuring standardized signals (e.g. mobile
radio standards). For this purpose, the standards listed in the annex (
​
chapter B, "Standard
Configurations" , on page 365) are stored in the R&S NRP2. The
SYST:STAN:PRES
command sets the listed parameters and, if desired, also configures front-panel display
windows (if
SYST:STAN:PWS ON
).
Parameters:
<string> The available standards and the associated strings can be queried
with the
SYSTem:STANdard:CATalog
command.
*RST: <empty_string>
SYSTem:STANdard:PWSettings <state>
If
SYST:STAN:PRES <string>
is used,
SYST:STAN:PWS
(Preserve Window Settings)
determines whether the window system is also configured with the calculate blocks
(
OFF
) or whether exclusively sensor parameters are set (
ON
).
Parameters:
<state> ON | OFF
*RST:
OFF
SYSTem:STANdard:TRIGger:SOURce <source>
If
SYST:STAN:PRES <string>
is used, this command determines whether the sen-
sors are set to internal (
INT
) or external (
EXT
) triggering.
Parameters:
<source> INT | EXT
*RST:
INT
SYSTem