Remote control commands
R&S
®
NRPxxA(N)
114
User Manual 1177.6017.02 ─ 08
SYSTem:LED:MODE
<mode>
Sets whether the color of the system status LED is controlled by the power sensor firm-
ware or by the user settings.
For more information, see
.
Parameters:
<mode>
USER | SENSor
*RST:
SENSor
SYSTem:MINPower?
Queries the lower power measurement limit.
[SENSe<Sensor>:]CORRection:SPDevice:STATe
is set to
ON
. The lower measurement limit refers to the sensor or to the combination of a sensor
and the components connected ahead of it.
Use this query to determine a useful resolution for the result display near the lower
measurement limit.
Usage:
Query only
SYSTem:PARameters?
Returns an XML-output containing all commands with the following information, if avail-
able for the command:
●
Default value
●
Minimum value
●
Maximum value
●
Parameters
●
Limits
Each command is shortened to a command token, consisting only of the mnemonics
short form. For example,
CALibration:DATA
is shortened to
CALDATA
as command
token.
Usage:
Query only
SYSTem:PARameters:DELTa?
Returns an XML-output containing all commands that differ from the defined default
status set by
The commands are accompanied by the same information as for
.
Usage:
Query only
Configuring the system
