R&S NGU User Manual Download

Page: 21 / 214

Getting started

R&S

NGU

User Manual 1179.2531.02 ─ 03

Figure 4-1: Inclined position

Positioning of instrument

The instrument must be positioned in a manner that allows you to disconnect the unit
from the mains at any time and without restrictions.

4.1.4.2

Rack mounting

The instrument can be installed in a 19

rack using the rack adapter R&S HZN96 (P/N

3638.7813.02). Proceed according to the installation instructions supplied with the rack
adapter.

Ambient temperature

Place the R&S

NGU source measure unit in an area where the ambient temperature is

5 °C to +40 °C. The R&S

NGU source measure unit is fan-cooled and must be

installed with sufficient space along the sides to ensure free flow of air.

4.2

Instrument tour

This chapter provides an overview of all the controls available in the R&S

NGU models

and steps to switch on the instrument for the first time.

●

Overview of controls

................................................................................................22

●

Switching on the instrument

....................................................................................26

Instrument tour

Summary of Contents for NGU























































































































































































































Search results

Summary of Contents for NGU

Reviews:

Related manuals for NGU

Brands by name

Popular brands

R&S NGU, User Manual

Search results

Summary of Contents for NGU

Reviews:

Related manuals for NGU

Brands by name

Popular brands