Operating Basics
R&S
®
NGL200
30
User Manual 1178.8736.02 ─ 02.01
Color
Operating mode
Description
CC mode
Active outputs are operated in a constant current mode
CR mode
Active outputs are operated in a constant resistance mode.
This condition occurs if the set voltage is below the voltage
applied externally at the output connectors (sink mode) and
constant resistor is switched on in channel menu.
5.2
Using the Touchscreen
The R&S
NGL200 provides a touch-sensitive screen which can be disabled (see
on page 59) in the instrument settings. The following illus-
trates the touchscreen gestures and highlight the different touchscreen features that
can be performed on the instrument.
5.2.1
Using Gestures
Tap
Tap on the screen to select or toggle the value.
Swipe up and down
Swipe in the menu to scroll it.
5.2.2
Accessing Functionality in the Home Window
The following illustrates various ways of accessing functions in the home window.
5.2.2.1
Settings Button
The "Settings" button navigates to the main menu window where you can set device or
individual channel settings on the instrument.
1. Select the "Settings" button.
The R&S
NGL200 displays main menu window.
2. Select "Device" or respective channel tab ("Channel 1" or "Channel 2") to open the
menu.
3. Scroll up or down for the available items in the menu.
4. Select the required item to configure the settings.
5. Select the back arrow key or press [Back] key to close the menu.
Using the Touchscreen