R&S LCX Series, User Manual

Page: 70 / 242

Instrument functions
R&S
®
LCX Series
70 User Manual 1179.2260.02 ─ 02
How to: see Chapter 8.2.2, "Configuring the main view" , on page 70.
<measurement pair> ..................................................................................................... 70
<measurement accuracy> .............................................................................................70
<measurement pair>
Selects the measurement parameters.
Depending on the type of component sample, the R&S LCX adjusts the list of parame-
ters automatically.
Remote command:
FUNCtion:IMPedance[:TYPE]
on page 197
<measurement accuracy>
The test signal monitor indicates accuracy of the recent measurement.
Remote command:
MEASure:ACCuracy?
on page 207
8.2.2 Configuring the main view
Selecting the parameters for display
To select the measurement parameters in the numeric view:
1. At the front panel, press the [home] key.
2. Select the parameter pair softkey in the upper left corner of the screen, to open the
selection editor.
3. Select the corresponding measurement pair.
4. Confirm the selection.
5. Select the second measurement pair accordingly.
8.3 Measurement functions
The hardkeys provided in the function panel at the front select the measurement com-
ponent type.
Functions [hardkeys] ..................................................................................................... 70
Functions [hardkeys]
Selects the type of component sample to be measured.
Remote command:
FUNCtion:MEASurement:TYPE
on page 198
Measurement functions