R&S FSW Series, User Manual

Page: 1181 / 1450

Remote Commands
R&S
®
FSW
1181 User Manual 1173.9411.02 ─ 43
<m> Marker
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example: CALC:DELT:FUNC:FIX ON
Switches on the measurement with fixed reference value for all
delta markers.
CALC:DELT:FUNC:FIX:RPO:X 128 MHZ
Sets the frequency reference to 128 MHz.
CALC:DELT:FUNC:FIX:RPO:Y 30 DBM
Sets the reference level to +30 dBm.
Manual operation: See "Defining a Fixed Reference" on page 523
14.8.3.8 Marker Peak Lists
Useful commands for peak lists described elsewhere
●
CALCulate<n>:MARKer<m>:PEXCursion
on page 1159
●
MMEMory:STORe<n>:PEAK
on page 1254
●
Chapter 14.8.3.3, "Configuring and Performing a Marker Search" , on page 1158
Remote commands exclusive to peak lists
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:ANNotation:LABel[:STATe]
....................... 1181
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:COUNt?
................................................. 1182
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks[:IMMediate]
............................................ 1182
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:LIST:SIZE
...............................................1183
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:SORT
.................................................... 1183
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:STATe
.................................................... 1183
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:X?
......................................................... 1184
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:Y?
......................................................... 1184
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:ANNotation:LABel[:STATe]
<State>
This command turns labels for peaks found during a peak search on and off.
The labels correspond to the marker number in the marker peak list.
Suffix:
<n>
.
Window
<m> Marker
Analyzing Measurements (Basics)