R&S FSW-K7, User Manual

Page: 48 / 407

Configuration
R&S
®
FSW-K7
48 User Manual 1173.9240.02 ─ 23
5 Configuration
Access : MODE > "Analog Demod"
Analog demodulation measurements require a special application on the R&S FSW.
When you activate an Analog Demodulation application the first time, a set of parame-
ters is passed on from the currently active application. After initial setup, the parame-
ters for the measurement channel are stored upon exiting and restored upon re-enter-
ing the channel. Thus, you can switch between applications quickly and easily.
When you activate the Analog Demodulation application, an Analog Demodulation
measurement for the input signal is started automatically with the default configuration.
The "Analog Demod" menu is displayed and provides access to the most important
configuration functions.
The remote commands required to perform these tasks are described in Chapter 11,
"Remote Commands for Analog Demodulation Measurements" , on page 177.
Predefined settings
For commonly performed measurements, standard setup files are provided for quick
and easy configuration. Simply load an existing standard settings file and, if necessary,
adapt the measurement settings to your specific requirements.
For an overview of predefined standards and settings see Chapter A.1, "Predefined
Standards and Settings" , on page 379.
● Configuration Overview ...........................................................................................48
● Configuration According to Digital Standards ......................................................... 51
● Input and Frontend Settings ....................................................................................52
● Trigger Configuration .............................................................................................. 96
● Data Acquisition .................................................................................................... 105
● Demodulation Display ........................................................................................... 109
● Demodulation ........................................................................................................110
● Output Settings ..................................................................................................... 126
● Automatic Settings ................................................................................................ 129
5.1 Configuration Overview
Access : "Meas Config" > "Overview"
Using the R&S FSW Analog Demodulation application you can perform analog demod-
ulation using predefined standard setting files, or independently of digital standards
using user-defined measurement settings. Such settings can be stored for recurrent
use.
Thus, configuring Analog Demodulation measurements requires one of the following
tasks:
●
Selecting an existing standard settings file and, if necessary, adapting the mea-
surement settings to your specific requirements.
Configuration Overview