R&S FSW-K7, User Manual

Page: 138 / 407

Analysis
R&S
®
FSW-K7
138 User Manual 1173.9240.02 ─ 23
Export Trace to ASCII File
Opens a file selection dialog box and saves the selected trace in ASCII format (
.dat
)
to the specified file and directory.
The results are output in the same order as they are displayed on the screen: window
by window, trace by trace, and table row by table row.
Note: Secure user mode.
In secure user mode, settings that are stored on the instrument are stored to volatile
memory, which is restricted to 256
MB. Thus, a "Memory full" error can occur although
the hard disk indicates that storage space is still available.
To store data permanently, select an external storage location such as a USB memory
device.
For details, see "Protecting Data Using the Secure User Mode" in the "Data Manage-
ment" section of the R&S
FSW User Manual.
Remote command:
MMEMory:STORe<n>:TRACe
on page 310
6.3 Working with Markers in the R&S FSW Analog
Demodulation application
Access : "Overview" > "Analysis"
Basically, markers in the R&S FSW Analog Demodulation application are very similar
to those in the Spectrum application. However, some additional functions are available.
● Marker Settings .....................................................................................................138
● Marker Search Settings and Positioning Functions .............................................. 143
● Measuring Phase Noise ........................................................................................145
● Marker Function Configuration ..............................................................................146
6.3.1 Marker Settings
Access : "Overview" > "Analysis" > "Marker" > "Markers"
Or : "Marker" > "Markers"
The remote commands required to define these settings are described in Chap-
ter 11.8.1, "Working with Markers Remotely" , on page 319.
● Individual Marker Setup ........................................................................................ 138
● General Marker Settings ....................................................................................... 141
6.3.1.1 Individual Marker Setup
Access : "Overview" > "Analysis" > "Marker" > "Markers"
Or : "Marker" > "Markers" tab
Working with Markers in the R&S FSW Analog Demodulation application