R&S FSW-K7, User Manual

Page: 141 / 407

Analysis
R&S
®
FSW-K7
141 User Manual 1173.9240.02 ─ 23
Assigning the Marker to a Trace
The "Trace" setting assigns the selected marker to an active trace. The trace deter-
mines which value the marker shows at the marker position. If the marker was previ-
ously assigned to a different trace, the marker remains on the previous frequency or
time, but indicates the value of the new trace.
If a trace is turned off, the assigned markers and marker functions are also deactiva-
ted.
Remote command:
CALCulate<n>:MARKer<m>:TRACe
on page 321
All Markers Off
Deactivates all markers in one step.
Remote command:
CALCulate<n>:MARKer<m>:AOFF
on page 320
6.3.1.2 General Marker Settings
Access : "Overview" > "Analysis" > "Marker" > "Marker Settings"
Or : "Marker" > "Markers Settings" tab
Some general marker settings allow you to influence the marker behavior for all mark-
ers.
Marker Table Display .................................................................................................. 141
Marker Stepsize .......................................................................................................... 142
Defining a Fixed Reference .........................................................................................142
Link Time Marker ........................................................................................................ 142
Link AF Spectrum Marker ........................................................................................... 142
Marker Table Display
Defines how the marker information is displayed.
"On" Displays the marker information in a table in a separate area beneath
the diagram.
"Off" Displays the marker information within the diagram area. No separate
marker table is displayed.
"Auto" (Default) Up to two markers are displayed in the diagram area. If
more markers are active, the marker table is displayed automatically.
Working with Markers in the R&S FSW Analog Demodulation application