Remote Commands to Perform Measurements with I/Q Data
R&S
®
FSV/A3000 I/Q
Analyzer
152
User Manual 1178.8536.02 ─ 01
Example:
//Define generator output level
SOUR:EXT:POW -30dBm
Manual operation:
See
SOURce<si>:EXTernal<gen>[:STATe]
<State>
This command activates or deactivates the connected external generator.
Suffix:
<si>
.
irrelevant
<gen>
Parameters:
<State>
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Manual operation:
See
SOURce<si>:POWer[:LEVel][:IMMediate]:OFFSet
<Offset>
This command defines a level offset for the external generator level. Thus, for exam-
ple, attenuators or amplifiers at the output of the external generator can be taken into
account for the setting.
Suffix:
<si>
.
irrelevant
Parameters:
<Offset>
Range:
-200 dB to +200 dB
*RST:
0dB
Default unit: DB
Example:
//Define a level offset on the external generator
SOUR:POW:OFFS -10dB
Manual operation:
See
Interface Configuration
The following commands are required to configure the interface for the connection to
the external generator.
SOURce<si>:EXTernal<gen>:ROSCillator[:SOURce]
.........................................................153
SYSTem:COMMunicate:GPIB:RDEVice:GENerator<gen>:ADDRess
...................................153
SYSTem:COMMunicate:RDEVice:GENerator<gen>:INTerface
............................................153
SYSTem:COMMunicate:RDEVice:GENerator<gen>:LINK
.................................................. 154
SYSTem:COMMunicate:RDEVice:GENerator<gen>:TYPE
................................................. 154
SYSTem:COMMunicate:TCPip:RDEVice:GENerator<gen>:ADDRess
................................. 155
Configuring I/Q Analyzer Measurements