R&S FSV-K8, Operating Manual

Page: 106 / 135

Remote Commands for Bluetooth Measurements (K8)
R&S
®
FSV-K8
106 Operating Manual 1176.7610.02 ─ 02
Manual operation: See "Range Log Manual" on page 49
See "Range Log 100 dB" on page 50
See "Range Log 50 dB" on page 50
See "Range Log 10 dB" on page 50
See "Range Log 5 dB" on page 50
See "Range Log 1 dB" on page 51
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:MODE <Mode>
This command selects the type of scaling of the y-axis.
When
SYSTem:
​
DISPlay:
​
UPDate
​
is turned off, this command has no immediate
effect on the screen.
Suffix:
<n>
.
window; For applications that do not have more than 1 measure-
ment window, the suffix <n> is irrelevant.
<t> irrelevant
Parameters:
<Mode> ABSolute
absolute scaling of the y-axis
RELative
relative scaling of the y-axis
*RST:
ABS
Example: DISP:TRAC:Y:MODE REL
Manual operation: See "Grid Abs/Rel " on page 53
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:PDIVision <Value>
This remote command determines the grid spacing on the Y axis for all diagrams,
where possible.
Suffix:
<n>
.
irrelevant
<t> irrelevant
Parameters:
<Value> numeric value; the unit depends on the result display
*RST:
depends on the result display
Example: DISP:TRAC:Y:PDIV 10
Sets the grid spacing to 10 units (for example 10 dB in the Code
Domain Power result display).
Mode: CDMA, BT, EVDO, TDS, WCDMA
DISPlay Subsystem (BLUETOOTH, K8)