manualshive.com logo in svg

R&S FSV-K7, Operating Manual, Page: 128 / 262

Share
Download
R&S FSV-K7 Operating Manual Download Page 128

Analog Demodulation Option R&S

 

FSV–K7

R&S

®

 FSV-K7/K7S

128

Operating Manual 1176.7561.02 ─ 06

[SENSe:]ADEMod:AM:RELative:AFSPectrum:RESult? 

<TraceMode>

This command reads out the AF spectrum result data of the AM-demodulated signal
for the specified result type. The data format of the output data is determined with the
FORMat command (see 

Chapter 2.3.6.2, "Formats for Returned Values: ASCII Format

and Binary Format"

, 

on page 118).

The output unit is dB (logarithmic display) or % (linear display).

Query parameters: 

<TraceMode>

WRITe | AVERage | MAXHold | MINHold | VIEW
The specified trace mode must be one of those configured by

[SENSe:]ADEMod:AM[:ABSolute][:TDOMain][:TYPE]

on page 125. Otherwise a query error is generated.
For details on trace modes see 

Chapter 2.3.6.1, "Trace Mode

Result Types"

, 

on page 118.

Example: 

ADEM:SET 8MHz,32000,EXT,POS,-500,30

Sets the demodulator

ADEM:FM AVER,MAXH,MINH

Selects the FM results to be measured

ADEM:AM:REL WRIT,OFF,OFF

Selects the AM results to be measured

ADEM:AM:REL:AFSP WRIT,OFF,OFF

Selects the AF spectrum results of the demodulated AM signal
to be measured

ADEM ON

Switches on the demodulator

INIT; WAI

Starts the measurement and waits for the termination

FORM ASC

Selects the output format

ADEM:FM:RES? AVER

Reads the FM average result data

ADEM:FM:RES? MAXH

Reads the FM Maxhold result data

ADEM:FM:RES? MINH

Reads the FM Minhold result data

ADEM:AM:REL:RES? WRIT

Reads the current AM result data

ADEM:AM:REL:AFSP:RES? WRIT

Reads the current AF spectrum result data of the demodulated
AM signal

Usage: 

Query only

Mode: 

ADEMOD

Remote Commands of the Analog Demodulation (R&S

 

FSV–K7)

Summary of Contents for FSV-K7







































































































































































































































































Reviews:

No comments