manualshive.com logo in svg

R&S FSV-K7, Operating Manual, Page: 126 / 262

Share
Download
R&S FSV-K7 Operating Manual Download Page 126

Analog Demodulation Option R&S

 

FSV–K7

R&S

®

 FSV-K7/K7S

126

Operating Manual 1176.7561.02 ─ 06

Example: 

ADEM:AM AVER,MAXH,MINH,OFF,OFF,OFF

Determines average, max hold and min hold values simultane-
ously for the traces 1-3.

ADEM:AM WRIT,OFF,OFF,OFF,OFF,OFF

Determines only the current measurement values for trace 1.

ADEM:AM OFF,OFF,OFF,OFF,OFF,OFF

Switches AM demodulation off.

Mode: 

ADEMOD

[SENSe:]ADEMod:AM:RELative[:TDOMain][:TYPE] 

<TraceMode>

This command selects the result types to be measured simultaneously by AM demodu-
lation.

Parameters for setting and query: 

<TraceMode>

<TraceMode1>, <TraceMode2>, <TraceMode3>, <Trace-
Mode4>, <TraceMode5>, <TraceMode6>

WRITe | AVERage | MAXHold | MINHold | VIEW | OFF

For details on trace modes see 

Chapter 2.3.6.1, "Trace Mode

Result Types"

, 

on page 118.

*RST: 

WRITe,OFF,OFF,OFF,OFF,OFF (FM-
Stereo:OFF,OFF,OFF,OFF,OFF,OFF)

Example: 

ADEM:AM:REL AVER,MAXH,MINH

Determines average, max hold and min hold values simultane-
ously.

ADEM:AM:REL WRIT,OFF,OFF

Determines only the current measurement values.

ADEM:AM:REL OFF,OFF,OFF

Switches AM demodulation off.

Mode: 

ADEMOD

[SENSe:]ADEMod:AM:RELative[:TDOMain]:RESult? 

<TraceMode>

This command reads the result data obtained by AM demodulation for the specified
result type. The data format of the output data block is defined by the FORMat com-
mand (see 

Chapter 2.3.6.2, "Formats for Returned Values: ASCII Format and Binary

Format"

, 

on page 118).

The output unit is %.

Query parameters: 

<TraceMode>

WRITe | AVERage | MAXHold | MINHold | VIEW
The specified trace mode must be one of those configured by

[SENSe:]ADEMod:AM[:ABSolute][:TDOMain][:TYPE]

on page 125. Otherwise a query error is generated.
For details on trace modes see 

Chapter 2.3.6.1, "Trace Mode

Result Types"

, 

on page 118.

Remote Commands of the Analog Demodulation (R&S

 

FSV–K7)

Summary of Contents for FSV-K7







































































































































































































































































Reviews:

No comments