R&S FSMR3000, User Manual, Page: 360 / 733

Network Operation and Remote Control
R&S
®
FSMR3000
360 User Manual 1179.0116.02 ─ 02
"v3" Select SNMP version v3.
Unlocks the
settings available for SNMP v3.
"v2c + v3" Select both SNMP versions v2c and v3.
Unlocks the settings for both SNMP v2c and v3.
Remote command:
SYSTem:COMMunicate:SNMP:VERSion
on page 617
REST
Turns communication via REST API on or off.
Remote command:
SYSTem:COMMunicate:REST:ENABle
on page 614
SNMPv2c Configuration
For SNMPv2c/v1 authentication, you can define the "Access" and "Community".
Access ← SNMPv2c Configuration
Defines the access an SNMP user can have for a specific SNMP community: read-
write = RW, read-only = RO.
"RW" Read-write access allows the user to read and change information.
By default, the user has read-write access rights.
"RO" Read-only access allows the user to only read information.
Remote command:
SYSTem:COMMunicate:SNMP:COMMunity:RO
on page 614
SYSTem:COMMunicate:SNMP:COMMunity:RW
on page 614
Community ← SNMPv2c Configuration
Defines the SNMP community string. An SNMP community represents a collection of
devices and agents grouped to monitor them. Authorized managers and the managed
devices belong to an SNMP community.
You can define an individual community for each read-write and read-only access.
The default community is the serial number of the instrument (same community for
read-only and for read-write).
Entering a community is mandatory.
SNMPv3 Configuration
For SNMPv3 authentication, you can define user profiles. You can manage them via a
table.
To add a new user, select the "Add" button and enter the data.
To delete all user profiles, select the "Delete All" button.
To delete a single user profile, select the "x" in the appropriate user line of the table.
Remote command:
Create user:
SYSTem:COMMunicate:SNMP:USM:USER
on page 615
Query all users:
SYSTem:COMMunicate:SNMP:USM:USER:ALL?
on page 616
Network and Remote Control Settings