R&S FSMR3000, User Manual, Page: 614 / 733

Remote Commands
R&S
®
FSMR3000
614 User Manual 1179.0116.02 ─ 02
Parameters for setting and query:
<ID> 0 - 31
ID number of the tag you want to modify or query.
To identify the ID number, query all device tags from the system
first. For more information, read here
DIAGnostic:HUMS:
TAGS:ALL?
on page 612.
Example: //Add or modify a tag (tag 1)
DIAG:HUMS:TAGS 1,'location','building_11'
Manual operation: See "Add" on page 362
SYSTem:COMMunicate:REST:ENABle <RestState>
This command turns communication via the REST API on and off.
Parameters:
<RestState> ON | OFF | 0 | 1
Example: //Return REST state
SYST:COMM:REST:ENAB?
Manual operation: See "REST" on page 360
SYSTem:COMMunicate:SNMP:COMMunity:RO <CommunityString>
This command sets the SNMP community string for read-only access.
Prerequisites for this command:
●
Select an SNMP version that supports communities (
SYSTem:COMMunicate:
SNMP:VERSion
on page 617).
Setting parameters:
<CommunityString> String containing the community name.
Example: //Set community name
SYST:COMM:SNMP:VERS V12
SYST:COMM:SNMP:COMM:RO 'ABC'
Usage: Setting only
Manual operation: See "Access" on page 360
SYSTem:COMMunicate:SNMP:COMMunity:RW <CommunityString>
This command sets the SNMP community string for read-write access.
Prerequisites for this command:
●
Select an SNMP version that supports communities (
SYSTem:COMMunicate:
SNMP:VERSion
on page 617).
Setting parameters:
<CommunityString> String containing the community name.
Configuring the R&S FSMR3