R&S FSMR3000, User Manual

Page: 353 / 733

Network Operation and Remote Control
R&S
®
FSMR3000
353 User Manual 1179.0116.02 ─ 02
Display Remote Errors
Activates and deactivates the display of errors that occur during remote operation of
the R&S
FSMR3. If activated, the R&S FSMR3 displays a message box at the bottom
of the screen that contains the type of error and the command that caused the error.
The error message remains in place when you switch to "Local" mode. To close the
message box, select the "Close" icon.
Only the most recent error is displayed in remote mode. However, in local mode, all
errors that occurred during remote operation are listed in a separate tab of the "Net-
work + Remote" dialog box (see
Chapter 11.6.6, "Remote Errors" , on page 363).
Remote command:
SYSTem:ERRor:DISPlay
on page 609
SYSTem:ERRor:CLEar:REMote
on page 620
11.6.3 Compatibility Settings
The R&S FSMR3 can emulate the GPIB interface of other signal and spectrum ana-
lyzers, e.g. in order to use existing control applications.
The required settings are configured in the "Compatibility" tab of the "Network
+Remote" dialog box.
Language .................................................................................................................... 354
IF Gain ........................................................................................................................ 354
Sweep Repeat .............................................................................................................354
Network and Remote Control Settings