R&S FSMR3000, User Manual

Page: 349 / 733

Network Operation and Remote Control
R&S
®
FSMR3000
349 User Manual 1179.0116.02 ─ 02
Network settings in secure user mode
Be sure to store all network settings before SecureUser Mode is enabled; see Chap-
ter 9.2, "Protecting Data Using the Secure User Mode" , on page 238.
If the currently stored network settings are not suitable, you must correct them each
time you switch on the R&S
FSMR3 in secure user mode, as the settings are not
stored permanently in this case.
Computer Name ..........................................................................................................349
IP Address ...................................................................................................................350
Subnet Mask ............................................................................................................... 350
DHCP .......................................................................................................................... 350
Network Configuration .................................................................................................350
Computer Name
Each instrument is delivered with an assigned computer name, but this name can be
changed. The naming conventions of Windows apply. If too many characters and/or
numbers are entered, an error message is displayed in the status line.
The default instrument name is a non-case-sensitive string with the following syntax:
<Type><variant>-<serial_number>
For example
FSMR3026-123456
For example
FSMR3-123456
Network and Remote Control Settings