General Instrument Setup
R&S
®
FSMR3000
295
User Manual 1179.0116.02 ─ 02
If the number of error messages exceeds the capacity of the error buffer, "Message
Buffer Overflow" is displayed. To clear the message buffer use the "Clear All Mes-
sages" button.
The following information is available:
No
device-specific error code
Message
brief description of the message
Component
hardware messages: name of the affected module
software messages: name of the affected software
Date/Time
date and time of the occurrence of the message
Remote command:
10.4.4
Firmware Updates
Access
: [Setup] > "System Configuration" > "Firmware Update"
During instrument start, the installed hardware is checked against the current firmware
version to ensure the hardware is supported. If not, an error message is displayed
("Wrong Firmware Version") and you are asked to update the firmware. Until the firm-
ware version is updated, self-alignment fails. To see which components are not suppor-
ted, see the
.
The firmware on your R&S
FSMR3 may also need to be updated in order to enable
additional new features or if reasons for improvement come up. Ask your sales repre-
System Configuration Settings
