R&S ESW-K58, User Manual

Page: 56 / 103

Remote commands for Multi CISPR APD measurements
R&S
®
ESW-K58
56 User Manual 1179.0880.02 ─ 03
8.4.2 Screen layout
The following commands are required to change the evaluation type and rearrange the
screen layout for a measurement channel as you do using the SmartGrid in manual
operation. Since the available evaluation types depend on the selected application,
some parameters for the following commands also depend on the selected measure-
ment channel.
Note that the suffix <n> always refers to the window in the currently selected mea-
surement channel .
LAYout:ADD[:WINDow]?
................................................................................................... 56
LAYout:CATalog[:WINDow]?
.............................................................................................. 57
LAYout:IDENtify[:WINDow]?
.............................................................................................. 57
LAYout:REMove[:WINDow]
............................................................................................... 58
LAYout:REPLace[:WINDow]
.............................................................................................. 58
LAYout:SPLitter
................................................................................................................58
LAYout:WINDow<n>:ADD?
............................................................................................... 60
LAYout:WINDow<n>:IDENtify?
.......................................................................................... 60
LAYout:WINDow<n>:REMove
............................................................................................61
LAYout:WINDow<n>:REPLace
.......................................................................................... 61
CALCulate<n>:MARKer<m>:X
.......................................................................................... 62
CALCulate<n>:MARKer<m>:Y?
.........................................................................................62
CALCulate<n>:MARKer<m>:Z?
.........................................................................................62
LAYout:ADD[:WINDow]? <WindowName>,<Direction>,<WindowType>
This command adds a window to the display in the active channel.
This command is always used as a query so that you immediately obtain the name of
the new window as a result.
To replace an existing window, use the
LAYout:REPLace[:WINDow]
command.
Query parameters:
<WindowName> String containing the name of the existing window the new win-
dow is inserted next to.
By default, the name of a window is the same as its index. To
determine the name and index of all active windows, use the
LAYout:CATalog[:WINDow]?
query.
<Direction> LEFT | RIGHt | ABOVe | BELow
Direction the new window is added relative to the existing win-
dow.
<WindowType> text value
Type of result display (evaluation method) you want to add.
See the table below for available parameter values.
Return values:
<NewWindowName> When adding a new window, the command returns its name (by
default the same as its number) as a result.
Usage: Query only
Result display configuration