Remote commands for Multi CISPR APD measurements
R&S
®
ESW-K58
62
User Manual 1179.0880.02 ─ 03
CALCulate<n>:MARKer<m>:X
<Position>
This command moves a marker to a specific coordinate on the x-axis.
If necessary, the command activates the marker.
If the marker has been used as a delta marker, the command turns it into a normal
marker.
Suffix:
<n>
.
<m>
Parameters:
<Position>
Numeric value that defines the marker position on the x-axis.
The unit depends on the result display.
Range:
The range depends on the current x-axis range.
Default unit: Hz
Example:
CALC:MARK2:X 1.7MHz
Positions marker 2 to frequency 1.7 MHz.
CALCulate<n>:MARKer<m>:Y?
Queries the result at the position of the specified marker.
Suffix:
<n>
.
1..n
<m>
1..n
Return values:
<Result>
Default unit: DBM
Usage:
Query only
CALCulate<n>:MARKer<m>:Z?
This command queries the marker position on the z-axis of three-dimensional result
displays.
Suffix:
<n>
.
<m>
Return values:
<Position>
<numeric value>
Default unit: Depends on result display
Example:
//Query marker position
CALC:MARK:Z?
Usage:
Query only
Result display configuration
