Remote commands for Multi CISPR APD measurements
R&S
®
ESW-K58
51
User Manual 1179.0880.02 ─ 03
all bytes are transmitted. #0 specifies a data block of indefinite length. The use of the
indefinite format requires an
NL^END
message to terminate the data block. This format
is useful when the length of the transmission is not known or if speed or other consid-
erations prevent segmentation of the data into blocks of definite length.
8.2
Common suffixes
In the Multi CISPR APD application, the following common suffixes are used in remote
commands:
Table 8-1: Common suffixes used in remote commands in the Multi CISPR APD application
Suffix
Value range
Description
<m>
1..16
Marker
<n>
1..16
Window (
in the currently selected channel
)
<t>
1..6
Trace
<li>
1 to 8
Limit line
<i>
1..3
Selects one of the analog output channels (1, 2 or Phones).
<k>
1..8 (Limit line)
1 | 2 (Display line)
Selects a limit or display line.
<peak>
1..3000
Selects a peak.
Selecting windows in multiple channels
Note that the suffix <n> always refers to a window in the currently selected channel.
8.3
Application selection
........................................................................................ 51
.............................................................................................. 52
.......................................................................................... 52
................................................................................... 54
INSTrument:CREate:DUPLicate
This command duplicates the currently selected channel, i.e creates a new channel of
the same type and with the identical measurement settings. The name of the new
channel is the same as the copied channel, extended by a consecutive number (e.g.
"IQAnalyzer" -> "IQAnalyzer 2").
Application selection