R&S ESR Series, User Manual

Page: 675 / 1126

Remote Control
R&S
®
ESR
672 User Manual 1175.7068.02 ─ 12
CISPr (PULSe)
6 dB CISPR filter (commercial EMI standards)
Note: when the filter type is queried, the CISPR filter returns
'PULS'.
*RST:
NORMal
Example: BAND:TYPE NORM
Manual operation: See "Filter Type" on page 184
See "Filter Type" on page 301
See "Res BW CISPR / CISPR (6 dB)" on page 301
See "Res BW Mil Std/ MIL Std (6 dB)" on page 301
11.4.5 Controlling Inputs and Outputs
INPut:COUPling
.............................................................................................................672
INPut:TYPE
...................................................................................................................672
INPut:COUPling <CouplingType>
Toggles the RF input of the R&S ESR between AC and DC coupling.
Parameters:
<CouplingType> AC | DC
*RST:
AC
Example: INP:COUP DC
Manual operation: See "Input (AC/DC)" on page 187
INPut:TYPE <Input>
The command selects the signal source.
Parameters:
<Input> INPUT1
Selects RF input 1.
INPUT2
Selects RF input 2.
*RST:
INPUT1
Example: INP:TYPE INPUT1
Selects RF input 1.
Manual operation: See "Input (1 2)" on page 187
See "Range 1 to 10" on page 191
Remote Commands in Receiver Mode