R&S ESR Series, User Manual

Page: 304 / 1126

Spectrum Measurements
R&S
®
ESR
301 User Manual 1175.7068.02 ─ 12
For a list and description of supported detectors see Chapter 5.2.2, "Detectors" ,
on page 167.
Filter Type
Opens a submenu to select the filter type.
When measuring Spurious Emissions, using this softkey automatically opens the
"Sweep List" dialog (see
"Sweep List dialog box" on page 289).
The submenu contains the following softkeys:
●
Normal (3 dB)
●
CISPR (6 dB)
●
MIL Std (6 dB)
Note that the 6
dB bandwidths are available only with option R&S FSV-K54.
●
Channel
●
RRC
●
5-Pole (not available for sweep type "FFT")
For detailed information on filters see Chapter 6.2.6.3, "Selecting the Appropriate Filter
Type" , on page 366 and Chapter 6.2.6.4, "List of Available RRC and Channel Filters" ,
on page 367.
Remote command:
[SENSe:]BANDwidth|BWIDth[:RESolution]:TYPE
on page 671
Res BW CISPR / CISPR (6 dB)
Selects the measurement bandwidth for commercial EMC standards according to
CISPR.
If you select the bandwidth with the "Res BW CISPR" softkey, the R&S ESR automati-
cally changes the filter type to a 6 dB bandwidth.
For more information see Chapter 5.2.1, "Measurement Bandwidth" , on page 166.
Remote command:
Filter type:
[SENSe:]BANDwidth|BWIDth[:RESolution]:TYPE
on page 671
Filter bandwidth:
[SENSe:]BANDwidth|BWIDth[:RESolution]
on page 670
Res BW Mil Std/ MIL Std (6 dB)
Selects the measurement bandwidths for military EMC standards.
If you select the bandwidth with the "Res BW Mil Std" softkey, the R&S ESR automati-
cally changes the filter type to a 6 dB bandwidth.
For more information see Chapter 5.2.1, "Measurement Bandwidth" , on page 166.
Remote command:
Filter type:
[SENSe:]BANDwidth|BWIDth[:RESolution]:TYPE
on page 671
Filter bandwidth:
[SENSe:]BANDwidth|BWIDth[:RESolution]
on page 670
Measurements