Remote Control
R&S
®
ENV216
27
User Manual 5201.6693.14 ─ 04
If remote control is performed via an R&S receiver, the REMOTE LED is lit when
the ESH3-Z5 type network is selected. The user can choose between "N" and
"L1".
The 150-kHz-highpass filter can be inserted into the signal path by pressing the
“Floating” key on the receiver.
The pulse limiter is not remote controllable. For safety reasons at remote control
the pulse limiter is turned on. If it is assumed, that the pulse limiting influences the
noise spectrum, it can be manually remeasured.
