1xEV-DO Measurements
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
292
User Manual 1173.9511.02 ─ 11
3.3.9 Generator Shortcut
This feature enables the user to start the GPRF generator and use GPRF related hot-
keys and softkeys within the measurement application. It improves the usability for non
signaling tests where the DUT's reaction on varying generator signals is measured.
The configuration applies to both the 1xEV-DO multi evaluation measurement and
OLTR measurement.
The "Generator Shortcut" is only available in the "Standalone (Non Signaling)" mode.
Fig. 3-27: GPRF generator shortcut
As soon as a connection to the GPRF generator instance is established, two additional
softkeys with corresponding hotkey bars provide access to the generator configuration,
see
"ARB/List Mode, GPRF<i> Generator"
Use the appropriate softkey/hotkey combination to access the generator parameters.
For details on the available parameters see the GPRF generator documentation.
3.3.10 Multi Evaluation Measurement Results
The results of the 1xEV-DO multi evaluation measurement are displayed in several dif-
ferent views; see detailed description in section
Multi Evaluation Measurement Results
The multi evaluation measurement provides an overview dialog and a detailed view for
each diagram in the overview. Each dialog shows the most important RF and analyzer
settings.
The overview dialog shows the modulation, spectrum, and code domain results as
traces or bar graphs.
GUI Reference
深圳德标仪器
