WCDMA Signaling
R&S
®
CMW-KG4xx/-KM4xx/-KS4xx
200
User Manual 1173.9657.02 ─ 11
GSM
For a GSM neighbor cell entry you can specify the operating band and the channel
number used for the Broadcast Control Channel (BCCH).
Remote command:
LTE
For an LTE neighbor cell entry you can specify the operating band and the downlink
channel number.
Remote command:
Threshold ← LTE
The configured "High" reselection threshold value is written into the system information
block element "threshXhigh" defined in 3GPP TS 25.331. The resulting threshold value
in dB is displayed for information.
Remote command:
2.4.12.10
Time
The "Time" section allows you to send configurable date and time information to the
UE. Thus you can update the date and time displayed by the mobile. In a real network
this service is typically used to send the current local time to the UE.
The section is not relevant for reduced signaling. It is only visible if R&S CMW-KS410
is available.
Fig. 2-90: Time settings
Time Source
This parameter selects the date and time source.
●
CMW Time
Selects the current CMW (Windows) date and time as source. The Windows set-
tings determine the UTC date, the UTC time, the current daylight saving time offset
and the time zone offset.
●
Date / Time
GUI Reference
深圳德标仪器
135-1095-0799
