WCDMA Signaling
R&S
®
CMW-KG4xx/-KM4xx/-KS4xx
201
User Manual 1173.9657.02 ─ 11
Selects the parameters "Date / Time (UTC)" and "Daylight Saving Time" as source.
The time zone offset is set to 0.
Option R&S CMW-KS410 is required.
Remote command:
Date / Time (UTC)
Defines the UTC date and time to be used if "Time Source" is set to "Date / Time".
Option R&S CMW-KS410 is required.
Remote command:
Daylight Saving Time
Specifies a Daylight Saving Time (DST) offset to be used if "Time Source" is set to
"Date / Time".
You can disable DST or enable it with an offset of +1 hour or +2 hours.
Option R&S CMW-KS410 is required.
Remote command:
Send Time
Press "Now" to send the date and time information to the UE.
"at Register" selects whether the date and time information is sent to the UE during the
registration and attach procedures or not.
Option R&S CMW-KS410 is required.
Remote command:
2.4.12.11
Synchronization
The parameters in this section configure the synchronization to other signaling applica-
tions.
Fig. 2-91: Synchronization settings
Synchronization Zone
Select the same synchronization zone in all signaling applications that you want to syn-
chronize. "None" means that the application is not synchronized to other signaling
applications.
GUI Reference
深圳德标仪器
135-1095-0799
