Usage of the Web GUI
R&S
®
TSMA6B
128
User Manual 4901.4026.02 ─ 01
The device goes in standby mode and starts automatically after the configured delay
with the preconfigured measurement mode.
Shutdown Settings
Configures a shutdown sequence if the R&S TSMA6B is connected to a R&S TSMA6B
Battery Pack.
Auto Power Off ← Shutdown Settings
When activated, the R&S TSMA6B is powered off automatically, if the DC IN power is
removed from the connected R&S TSMA6B Battery Pack.
The time delay for powering off can be set manually (default 30s).
A.2.1.3
Speaker
The "Speaker" tab configures an acoustic warning signal.
Status (Speaker)
Activates or deactivates an acoustic warning signal.
Volume
Specifies the volume of the acoustic warning signal.
A.2.1.4
RF Band
The "RF Band" tab allows to recall and switch the selected RF band.
Current Configuration
Current valid band configuration
New Configuration
Selects a specific band.
A.2.1.5
Password
The "Password" tab allows to change the password of the R&S TSMA6B.
.....................................................................................128
Change Instrument Password
Changes and confirms a new password for the R&S TSMA6B.
Configuration
