Picture 3
Picture 4
To fit the oil cooler guard to the bike cut the foam strip provided into 10mm wide pieces and stick them to the
back of the oil cooler guard frame, so that they sit between the oil cooler guard and the radiator.
Remove the two bolts that secure the original oil cooler guard in place at the top behind the steering damper,
as shown in picture 1.
Offer the R&G oil cooler guard (SCG0004) into place on the oil cooler radiator and re-fit the two original
bolts through the oil cooler guard and into the oil cooler mount, as shown in pictures 2 & 3.
Fit 1x cable tie through the slot on each lower corner and loop it through the radiator matrix before
tightening, as shown in picture 4.
Ensure all bolts are tightened evenly and the oil cooler guard is mounted securely.
