background image

1055 Mendell Davis Drive, Jackson, MS 39272

888-994-7636, fax 888-266-5244

Information contained in this document is known to be current and accurate at the time 

of printing/creation.  Unified Brands recommends referencing our product line websites, 

unifiedbrands.net, for the most updated product information and specifications.

Custom 

Remote Raised Coldwall Refrigerator 

models 53000PR 

Description:

Remote  refrigerator  storage  units  with  mechanically  cooled 

raised rail. These units are offered in variety of lengths to meet 

your  specific  base  storage    or  pan  storage  requirements. The 

mechanically  cooled  pan  opening  uses  Randell’s  exclusive 

design technologies, such as our Exclusive Refrigerated Raised 

Rail Thermostat allowing customers to make adjustments to the 

rail temperatures (independent of the base). The rail is designed 

to be a manual defrost system and allows the operator to shut 

the rail off while leaving the base operational.

model 53354PR shown with
optional finished end

CABINET  EXTERIOR:  Top  to  be  one  piece  of  die-formed  16  gauge 
stainless  steel  with  2  1/2”  nosing.  Ends  at  top  fitted  with  recessed 
heavy  duty  steel  bars  for  field  bolting  units  together,  producing  a 
hairline seam. Hinged louver panel to be stainless steel. Exterior body to 
be corrosion resistant steel. Door opening frames are ABS and contain 
magnetic strip for positive seal of door gaskets. Work surface to be at 
36”  work  height.  Legs  to  be  6”  high  stainless  steel  with  adjustable 
bullet foot. Legs mounted to full length channel frame assembly which 
is integrally welded to bottom of body assembly. Legs can be moved left 
to right to avoid floor obstacles during installation.

CABINET INTERIOR: Base interior to be ABS thermoplastic at ends only. 
Stainless steel interior liner to be coved cornered to form bottom, back 
and top. One baked enamel finished shelf provided behind each door. 
Unit insulation to be CFC free foamed in place urethane.

DOORS: Door fronts to be 22-gauge stainless steel exterior front with 16 
gauge stainless steel door pulls/handles. The interior liner is vacuumed 
formed ABS with integral gasket retainer for easy cleaning and accepts 
Randell’s Exclusive Press Fit Gasket system.   Doors are mounted on 
concealed hinges. One removable wire shelf is supplied behind each 
door.

REFRIGERATION: Refrigerant to be specified by customer (Specification 
based on R-404a refrigerant). System is a balanced heavy duty system 
set-up to accept hook-up to a single compressor system. The base is 
cooled by an independent blower coil operating on its own expansion 
valve  and  thermostat  and  operates  through  a  dedicated  solenoid 
valve. The rail is provided with its own rail thermostat (located in the 
mechanical  housing)  making  it  easily  adjustable  for  specific  ambient 
conditions without effecting the balance of the system. An on/off switch 
for the rail is provided.  Optional electric condensate evaporator.

Standard Features:

• Low profile rail design with 2” recess pans provides easy 

   reach and optimal pan temperatures & reliability

• Front breathing mechanical housing with directed air flow-

   Randell Exclusive

• Easy maintenance Press-Fit gaskets- A Randell Exclusive

• Raised rail thermostat- A Randell Exclusive

• Drain in rail for easy cleaning

• Hinged Removable stainless steel covers

• Foamed in place urethane insulation providing superior 

   insulation and durability

• 6” high adjustable legs, moveable left to right if needed

• Available up to 16’ under one common assembly

• Adapter bars are standard to accommodate a compliment of 
   1/6 size pans

Specifications:

Options & Accessories:

Patented Drawer Cartridge Systems - 

Exclusive 

Randell F 3 years parts & labor warranty!

Partial Length Rails
Tray racks for sheet pans (33" dp., 24" doors only)
Cutting boards
Stainless Steel Ends    
Stainless Steel Back
Laminate fronts, ends and back options
Casters in lieu of legs 

 

Export voltages 
Over-shelving storage options
Lift-off (removable) night covers
Hinged slide-back removable covers
Flat top rails for use in display type kitchens
Ambient fighting hood design with slide-back covers
Wide pan rail

Randell Custom, Page 21a

Revised 09/04

model 

53333PR 

53336PR 

53339PR 

53342PR 

53351PR 

53354PR 

53357PR

 

53360PR 

53363PR 

53372PR 

53375PR 

53378PR 

53381PR   53384PR

 

53390PR 

533105PR  533117PR

Summary of Contents for 11318























































































Reviews: