Fig.5
the lid onto the jar assembly. Place the measure cup exactly into the lid by fitting the small projection on the
both sides of the cup into the slots of the lid and turning the cup clockwise until tight.
（
See Fig.4
）
3) Finally, place the assembled jar onto the motor unit by aligning the strip on the assembled jar bottom. (See
Fig.5
）
CAUSION: Jar and jar base is now secure. Do not try to twist the jar and jar base onto motor unit
How to use
1. Peeled or cored the fruit or vegetables and then cut it into small dices.
2.
Place the food to be blended into the jar
（
See Fig.6
）
. Usually, certain amount of purified water has to be
added to facilitate the smooth running of appliance. The proportion of the food and water is 2:3.The
amount of mixture should not exceed the max level as indicated on the jar.
RECIPE
FOOD TYPE
SPEC
WEIGHT
SPEED
Carrot (apple, pear
etc. )
Cut into 15mm*15mm*15mmm
Carrot: 600g
Water: 900g
High speed
Note: never use boiling liquids or run the appliance empty.
3. Put the lid on the jar. Be sure the measuring cup is in place.
4. Plug the power cord into a standard wall outlet.
5. Turn the speed knob to the appropriate speed setting for your task.
6. For quick or delicate blending tasks, turn the speed knob to P position and hold for a few seconds and then
release, the knob will reset to O position automatically. Operate several times until the consistence you
want is obtained
7. If you want to add ingredients while the blender is working, remove the measuring cup and place
through
Fig.3
Fig.4
