4
indicator will light up. Then the kettle will start to boil the water, once the water
has being boiled the
On/Off switch
will be off automatically. You can shut off
the power by lifting the
On/Off switch
at any moment during boiling water. If
you want to boil water again, only press down the
On/Off switch
directly to
restart the kettle.
NOTE: Ensure that the On/Off switch is free of obstructions and the lid
is firmly closed, the kettle will not turn off if the switch is constrained or
if the lid is opening
.
5. Lift the kettle from the power base and then pour the water.
NOTE: Operate carefully when pouring the water from your kettle as
boiling water may result in scald, besides, don’t open the lid while the
water in the kettle is hot.
6. The kettle will not re-boil until the
On/Off switch
is pressed down again. The
kettle may be stored on the power base when not in use.
NOTE: Always disconnect the power supply when not use.
BOIL-DRY PROTECTION
Should you accidentally let the kettle operate without water, the boil-dry
protection will automatically switch off the power. If this occurs, allow the kettle
to cool before filling with cold water to reboil.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the power outlet and cool it down
completely before cleaning.
1. Never immerse the kettle, power cord or power base in water, or allow
moisture to contact with these parts.
2. Wipe the appearance of body with a damp cloth or cleaner, never use a
poisonous cleaner.
3. Remember to clean the filter at intervals. For easier cleaning, detach the filter
and then replace it after cleaning.
CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to
clean the outside of the kettle to prevent the gloss loss.
4. When not in use, the power cord can be stored at the bottom of the
appliance.