3
KNOW YOUR WATER KETTLE
BEFORE USING YOUR KETTLE
If you are using the kettle for the first time, it is recommended that you should
clean your kettle before use by boiling the Max capacity of water once and then
discarding the water. Wipe the surface with damp cloth.
NOTE: The max capacity of kettle is 1.7L.
USING YOUR WATER KETTLE
1. Place the unit on the level surface.
2. To fill the kettle, remove it from the power base and open the lid by pressing
the
lid release button
, fill with the desired amount of water, and then close
the lid. Alternatively, the kettle may be filled through the spout. The water level
should not exceed MAX marks or sit below MIN level. Too little water will
cause the kettle switching off before the water has boiled.
NOTE: Do not fill the water over the maximum level, as water may spill
out of the spout when boiling. Ensure that the lid is firmly in place
before plugging the power outlet.
3. Position the kettle on the power base.
4. Connect the plug into a power outlet. Press down the
On/Off switch
, the