3
2
1
0
OPERATING INSTRUCTIONS
1. SPEED CONTROL
Fan speed is controlled by the switch :
0-1-2-3 (Off-Low-Medium-High)
2.OSCILLATION CONTROL
To make the fan oscillate, press the clutch knob located on the top
of the motor housing. To get the directional airflow, pull the clutch
knob up to its initial position.
To adjust the air flow upward or downward, push the guards lightly to the desired
direction.
4.HEIGHT ADJUSTMENT
The height of the fan can be adjusted by loosening the locknut carefully raising or
lowering the fan and firmly re-tightening the locknut.
4
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to
qualified service personnel if service is needed.
1. Before cleaning and assembling, fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the
motor free of dust. Do not disassemble the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface.
Do not use any of the following as a cleaner: gasoline, thinner, bending.
5. Do not allow water or any other liquid into the motor housing or interior parts.
MAINTENANCE INSTRUCTION
CLEANING
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with a soft cloth moisten with mild soap.
Thoroughly remove soap film with dry cloth.