8
RAMTE
CH
GL
OBAL
.COM
The WES3 Water Interface in combination with a water detection sensor is designed to trigger if water is detected along the
sensor length (zone).
The input triggers a water alert on the WES3 Connect base station and an immediate notification in (where used) the REACT
cloud and mobile application. For further details on the REACT application, visit www.ramtechglobal.com.
Note:
The WES3 Water Interface is not a fire alarm device.
Use cases:
O
Water detection in storerooms/basements/facilities wherever water leakage may occur
O
Leaky pipe or tracing detection (cable wrapped along the pipe)
O
Protection against floods or groundwater
O
Detection of water leaks in drip tray.
Water detection tape and cable features:
O
Detects liquid along the entire length of the sensing cable
O
Easy to lay, wrap, install and secure
O
Polarised cables for easy installation
O
Re-deployable from one location to another
O
Extendable with connectors, sleeves or crimps. Maximum length 50m.
Associated products:
O
Water Detection Tape
Textured woven polyester tape with parallel uninsulated copper wires
Band width: 18mm
Available lengths: 25m (82ft) or 50m (164ft) reel.
O
Water Detection Cable
PVC coated two core twisted pair with stainless steel elements
Diameter: 3.5mm
Available lengths: 2m (6.5ft), 5m (16.4ft), 10m (32.8ft), 15m (50ft), 25m (82ft) or 100m (328ft) reel (cut to length on site).
WES3 Water Interface
WES3 Water Interface
Water Detection Cable
Water Detection Tape
