Ramsond CHDZ-24-12-12, Installation Manual

Page: 16 / 40


Page 16

Wiring Figure
Wiring
NOTE: If the client wants to perform the wiring himself, refer to the following figures.
Run the main power cord through the lower line-outlet of the cord clamp.
CAUTION
Connect the connective cables to the terminals as identified with their respective matched
numbers on the terminal block of the indoor and outdoor units. For example, see the following US
models: Terminal L1(A) on the outdoor unit must connect with terminal L1 on the indoor unit.
One-two models:
Model A
Model E Model F Model G
Model B Model C Model D
Magnetic ring (not supplied, optional part)
(Used to hitch to the connective cable of the indoor
and outdoor units after installation.)