3
Assembling Your Winch
To assemble the QUICK MOUNT attach the handles to both ends of
the quick mount channel using (2) black 3/8” button head screws for
each handle. Tighten to 20 ft-lbs. torque.
Once the handles are attached, lift the winch into the quick mount
channel. Feed the looped end of the pre-wrapped cable through the
fairlead.
Place a 3/8” nut and flatwasher in each of the feet. Align the four
mounting holes in the quick mount channel with the feet of the winch.
Place a lockwasher on each 3/8” hex head screw and then press a
screw through each mounting hole and start it through a nut. Do not
tighten until all of the screws have been started. Tighten to 34 ft-lbs.
torque.
Align the base of the clevis hook with the loop on the end of the cable.
Run the pin through the clevis hook and the loop. Push the cotter pin
through the hole in the pin and bend the cotter pin to lock.
Winch Assembly
