Ramsey Electronics PM10DC, Manual

Page: 12 / 40

PM10DC
y
12
RAMSEY PM10DC PARTS LIST
Supplies
ˆ 1 1N4002 Rectifier Diode (Black body with white stripe marked 4002)
(D1)
ˆ
1 78L05 Voltage Regulator (TO-92 Case) (VR1)
ˆ 1 ADS7841PBN 12-Bit 4-channel A2D converter (U2)
ˆ 1 LMC662 Dual Rail to Rail opamp (U1)
ˆ 1 Pre-programmed MC68HRC908JK3 (U4)
ˆ 8 0.01uF ceramic capacitors (Marked 103) (C1,3,4,6,7,15,25,26)
ˆ 4 0.1uF ceramic capacitors (Marked 104) (C2,10,11,18)
ˆ 1 10pF ceramic capacitor (Marked 10 or 10K) (C16)
ˆ
4 10uF electrolytic capacitors (C5,8,19,23)
ˆ 1 1000uF electrolytic capacitor (C24)
ˆ 1 3.9uH inductor (orange-white-gold) (L1)
ˆ 2 1K ohm resistors (brown-black-red) (R20,21)
ˆ 1 10K ohm potentiometer (Orange top, 103) (R4)
ˆ 2 50K ohm potentiometer (Orange top, 503) (R13,19)
ˆ 1 47K ohm resistor (yellow-violet-orange) (R11)
ˆ 2 100K ohm resistors (brown-black-yellow) (R14,18)
ˆ 2 1.0K ohm 1% resistors (brown-black-black-brown) (R1,3)
ˆ 1 2.0K ohm 1% resistor (red-black-black-brown) (R9)
ˆ 3 10.0K ohm 1% resistors (brown-black-black-red) (R2,5,6)
ˆ
1 13.0K ohm 1% resistor (brown-orange-black-red) (R7)
ˆ 2 8-Pin dual row header (Or one 16-pin cut in half) (J2,6)
ˆ 1 14-Pin dual row header (goes with display) (DS1)
ˆ 1 20-Pin IC socket.
ˆ 1 2x8 Line Optrex LCD display (DS1)
ˆ 1 DPDT pushbutton switch (S3)
ˆ 2 SPST pushbutton switches, long neck (S1,S2)
ˆ
2 BNC board mounted connectors (J3,4)
ˆ 1 2.1mm Power Jack (J7)
ˆ 1 Binocular Core, type: (DC1)
ˆ 48” Of #24 magnetic wire.
ˆ 6” #16 Bus Wire
ˆ 1 50 Ohm terminator.