![background image](http://html1.mh-extra.com/html/ramsey-electronics/com3010/com3010_user-manual_3591731085.webp)
85
DETAILED INFORMATION
again. Other terminal software should not exhibit this problem.
Testing with some legitimate commands:
Enter “SYS OPEN 555” [ENTER], and the COM3010 should connect.
Enter “SET GF 403.25M” [ENTER]; this will set the generator frequency to 403.25MHz.
Enter “SET GL –45dBm” [ENTER]; this will set the level to –45dBm
Now that you are finished, type “SYS CLOSE [ENTER]”
The COM3010 will reply with “Disconnecting, Bye.” and will not respond until you issue an-
other “SYS OPEN 555” command.
All communications with the COM3010 are performed similarly using the commands listed.
You can also write up a text batch file and use the terminal software to send a batch file up to
4096 bytes in size which will allow for long scripts. There are delay functions to allow
measurements to settle or an automated test bench to get operations in place.
An example script used for automatic testing can be sent to the COM3010’s serial port as a
text file.
sys open 555
;Opens default addressed COM3010
sys prompt on
;Turns on system prompt
sys echo off
;Turns off character echo
set level -35
;Set level to -35dBm
set gf 985.56M
;Set generator frequency
set rf 985.56M
;Set receiver frequency
set gfm
;Set generator in FM mode
set rfm
;Set receiver in FM mode
set inttone 1.2k ;Set internal tone to 1.2kHz
set intdev 5k
;Set internal deviation to 5kHz
set mint on
;Set internal modulation on
set countermode 6
;Set RF counter to RF High, 1.0S gate.
sys pause 20
;Wait 2 seconds for count to settle
get rfcount
;Get the count
sys pause 10
;Wait 1 second
get rfcount
;Get next count
sys close ;Done, close communications.
The COM3010 serial interface is well-suited to allow for creating programs to control the
COM3010 in remote locations. A good environment to use is Visual Basic since a program can
be “whipped up” in very short order that will provide an easy interface to perform multiple
tasks in an automated fashion.
Property of Ramsey Electronics, Inc.
Do not reproduce or distribute.
Summary of Contents for COM3010
