15. ALWAYS FOLLOW MINIMUM
FASTENER EDGE DISTANCE AND
SPACING REQUIREMENTS.
The minimum
edge distance and spacing requirement for
concrete base materials is three-inches .
The minimum edge distance for steel base
material is ½-inch . The minimum spacing
for steel base materials is 1-1/2-inches .
Fasteners installed closer to one another
or to the edge may cause damage to the
base material or result in a loss of fastener
performance .
16. NEVER CARRY FASTENERS OR
OTHER HARD OBJECTS IN THE SAME
POCKET OR CONTAINER WITH FUEL
CELL.
The Fuel Cell could be punctured,
causing serious injury .
17. NEVER ALLOW ANYONE TO USE THE
TRAKFAST TOOL UNLESS THEY READ
AND UNDERSTAND THE TOOL MANUAL
AND ALL SAFETY INSTRUCTIONS.
It is
the tool owner’s responsibility to make sure
that all TrakFast tool users read and fully
understand all tool operation, safety and
maintenance instructions .
18. FUEL CELL
STORAGE.
Fuel
Cells contain
flammable gases
which are under
pressure and must
be stored in an area
where they will not be exposed to an open
flame, sparks, or temperatures above 120°
Fahrenheit (49° Centigrade) . Exposure to
temperatures above 120°F (49°C) may
cause the Fuel Cells to leak or burst,
releasing the flammable gases and
creating a risk of fire or explosion .
19. FUEL CELL DISPOSAL.
Never attempt
to puncture, crush, burn or refill a Fuel Cell .
Always dispose of empty Cells with trash
that will not be burned . Also, never place the
Fuel Cell with other materials for reclamation
or recycling .
20. TOOL STORAGE.
At the end of every
workday, remove the Battery Cell and store
it in the carrying case . Recharge the Cell
only if required as indicated by a red charge
light in the handle .
21. KEEP THE TOOL CLEAN.
At the end
of each work day, take a minute to wipe the
TrakFast tool with a clean rag . A dirty tool is
more likely to jam or malfunction .
22. NEVER PLACE
YOUR HAND OR
FINGERS OVER THE
NOSE OF THE TOOL.
The fastener or piston
can seriously injure your
hand in the event of an accidental discharge .
SAFETY INSTRUCTIONS
6
SAFETY INSTRUCTIONS
